Control Panel
84
4
1On connection to the network, if the machine's 'IP METHOD' is ' AUTO' the machine w ill attempt to automatically set the IP add ress and Subnet
Mask from a boo t server such as DHCP o r BOOTP. If a boot serv er cannot be found an APIPA IP address will be allocated, such as
169.254.[001-254].[000-2 55]. If the 'IP METHOD' of the machine is set to 'STATIC' you will ne ed to manua lly enter a n IP address from the
machine 's contr ol pane l.
WLAN
Status
Status
Signal
SSID (Shows SSID [uses a maxi mum of 32 digits and characters 0-9,
a-z and A-Z in ASCII values])
Comm. Mode AD-HOC*/Infrastructure Shows the current
Communication Mode.
Set to
Default
Restores wired network sett ings of the internal print serv er to default.
WLAN
Enable
On/Off*Chooses Ethernet link mode.
Factory
Reset
Restores all network settings of the internal print serv er to default.
Reset Menu
Display Shows Description
Reset Printer Resets the printer and restores all printer sett ings (including command settings) to settings
you have previously made wit h the control panel buttons.
Factory Reset Resets the printer and restores the printer sett ings (including command settings) to the
default settings.
Color Correction
Submenu Menu Selections Options Descriptions
ColorCalibration Calibrate Carry out calibration to revise the
colors.
Reset Set the calibration parameters back
to the default settings.
Auto Regist. Registration Adjusts the print positi on of each
color automatically.
Frequency Low/Medium*/High/Off Sets the interval time you want to
carry out the auto registrati on.
The default settings are shown in Bold with an asteri sk.
LAN for HL-4070CDW users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The default settings are shown in Bold with an asteri sk.