Cleaning the Primary Corona Wire | Brother HL-600 specs

CHAPTER 5 MAINTENANCE

9.Clean the primary corona wire inside the drum unit by gently sliding the tab right and left several times.

Home Position (▲)

Fig. 5-18 Cleaning the Primary Corona Wire

10. Position the tab at left end of the drum unit (▲ mark position.)

✔Warning

Be sure to position the tab at the home position to the left end of the drum after cleaning.

11.Install the drum unit into the printer.

See the section “REPLACING THE DRUM UNIT” in Chapter 5.

12.Close the drum cover and top cover.

13.Install the multi-purpose sheet feeder.

See the section “MULTI-PURPOSE SHEET FEEDER” in Chapter 2.

14.Plug in the power cord.

5–13