9
Do NOT connect the interface cable.
You will be prompted to connect the
interface cable during the driver
installation.
1Open the front cover by pressing the front
cover release button.
2Unpack the drum unit assembly.
Rock it from side to side several times to
distribute the toner evenly inside the
assembly.
3Put the drum unit assembly into the printer.
4Close the front cover of the printer.
2Install the Drum Unit Assembly
Front cover
Front cover
release
button
Go to the next page
Setting Up
Your Printer
Windows®
USB
Windows®
Parallel
Windows®
Network
Macintosh®
USB
Macintosh®
Network
For
Administrators
Installing the Driver