Wired Network

Macintosh

 

 

For Wired Network Interface Cable Users for Macintosh

9 Before you install

a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.

Important

For users of Mac OS X 10.5.7 or lower, upgrade to Mac OS X 10.5.8 - 10.7.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.)

Note

If you want to add the PS driver (BR-Script3 printer driver), please go to the Brother Solutions Center at http://solutions.brother.com/ and visit FAQ's on your model page for instructions.

b Remove the protective cap from the Ethernet

port marked with a symbol.

c Connect the network interface cable to the Ethernet port, and then connect it to a free port on your hub.

d Make sure your machine's power switch is on.

10 Install the printer driver

a Put the installer CD-ROM into your CD-ROM drive.

b Double-click the Start Here OSX icon. If prompted, select your model.

c Choose Wired Network Connection (Ethernet) and then click Next. Follow the on-screen instructions.

Note

It may take a few minutes for the installation to complete.

d Choose your machine from the list, and then click OK.

Note

•If there is more than one of the same model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name.

•You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Printer Settings Page. See Print the Printer Settings Page on page 31.

Wired

®Windows

Network

 

Macintosh

 

 

15