INTRODUCTION 1 - 7
About paper
The print quality can be affected by the type of paper you use in the
MFC.
To get the best print quality for the settings you’ve chosen, always
set the Paper Type to match the type of paper you load.
You can use plain paper, inkjet paper (coated paper), glossy paper,
transparencies and envelope s.
We recommend testing various paper types before purchasing large
quantities.
For best results, use the reco mmended paper.

Recommended Paper

To get the best print quality, we suggest using Brother paper.
(See table below.)
If Brother paper is not avail able in your country, we recommend
testing various papers befo re purchasing large quantities.
We recommend using “3M Transpar ency Film” when you print on
transparencies.
Brother Paper
When you print on inkjet pape r (coated paper),
transparencies and glossy paper, be sure to select the
proper media in the “Bas ic” tab of the printer driv er or in the
Paper Type setting of the menu (Menu/Set, 1, 2).
When you print on Brother glossy paper, load the instruction
sheet included with the gl ossy paper in the paper tray fir st,
and then place the glossy paper on the instruction sheet.
When you use transparencies or glossy paper, remove each
sheet immediately to prev ent smudging or paper jams.
Avoid touching the printed surface of the paper immediately
after printing; the surface may not be completely dry and
stain your fingers.
Paper Type Item
A4 Plain BP60PA
A4 Glossy BP60GLA
A4 Inkjet (Photo Matte) BP60MA