9
Setting Up
the Machine
Windows®
Mac OS® XMac OS®
8.6 - 9.2
Windows®
Network
For
Network Users Macintosh®
Network
1After the cleaning cycle is finished, the LCD
shows:
2Make sure the paper is loaded in the pa per
tray.
Press Colour Start.
The machine starts prin ting the PRINT
QUALITY CHECK SHEET (only d uring
initial ink cartridge installation).
3Check the quality of the four colour blocks
formed by the short lines printed on the
sheet.
(BLACK/ CYAN/ YELLOW / MAGENTA)
Avoid touching the printed surface
of the paper immediately aft er
printing, the surface may not be
completely dry and may stain your
fingers.
4The LCD shows:
5If all lines are clear and visible, press 1 on
the dial pad to finish the quality check.
---OR---
If you can see missing short li nes, press 2
on the dial pad and go to 6.
6The LCD asks you if the print quality is OK
for black and colour. Press 1 or 2 on the dial
pad.
After making your selection 1 (Yes) or 2 (No)
for both black and colour, th e LCD shows:
Press 1 (Yes), the machine will then start
cleaning the colours.
After cleaning is finished, press
Colour Start. The machine starts print ing
the PRINT QUALITY CHECK SHEET again
and goes back to step 3.
5Print Quality Check
Set Paper and
Press Start
Is Quality OK?
1.Yes 2.No
Print Quality Check
1. Check the quality of the four-color blocks formed by the short lines.
2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.
Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process
and follow the prompts on the LCD.
Black OK?
1.Yes 2.No
Start Cleaning?
1.Yes 2.No
OK Poor