Chapter 3
28
Tray use in Fax mode 3
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
Tray #1 is out of paper.
Tray #2 is set to a different paper size that
is more suitable for the received faxes.
Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose Tray Setting.
Press OK.
dPress aor b to choose Tray Use:Fax.
ePress dor c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
fPress Stop/Exit.
Secure Paper Feed mode for
Ledger size Short Grain Paper3
If your printed pages have smudge problems
when using Ledger paper, your paper may be
short grain paper. Choose
LGR - Short Grain and set it to On to
avoid this problem.
aPress Menu.
bPress aor b to choose
General Setup.
Press OK.
cPress aor b to choose
LGR - Short Grain.
dPress dor c to choose On.
Press OK.
ePress Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or paper manufacturer for
paper specifications.
• Printing will be slower when using the
LGR - Short Grain setting.