7
Setting Up
the MFC
Windows®
USB
Windows®
Parallel
Windows
NT® 4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
For
Network Users
Do not connect the Parallel or USB
cable yet.
1Plug the AC power cord into an AC outlet.
Turn the power switch on.
2Connect one end of the teleph one line cord
to the jack on the MFC marked LINE and the
other end to a modular wall jack.

Warning

■The MFC must be grounded using a 3-prong p lug.
■Since the MFC is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected t o
your MFC when you connect it to a telephone l ine.
Similarly, you can protect yourself when you want
to move your MFC by disconnecting the telephone
line first and then the power cord.
5Install the Power Cord and Phone Line
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see “Connecting an
external telephone answering device
(TAD)” in the Appendix of the User’s
Guide.
TAD
TAD