Search
You can search alphabetically for names you have stored in the One Touch and Speed Dial memories. (See Storing One Touch Dial numbers on page 45 and Storing Speed Dial numbers on page 47.)
a Press
(Address Book) twice.b Press the dial pad key for the first few letters of the name. (Use the chart on Entering text on page 140 to help you enter letters.)
Press OK.
c Press a or b to scroll until you find the name you are looking for.
Press OK. d Press Start.
Note
•If you do not enter a letter and press OK in step b, all registered names will appear. Press a or b to scroll until you find the name you are looking for.
•If the LCD shows No Contact Found when you enter the first few letters of the name, it means that a name for the letter is not stored.
Fax redial
If you are sending a fax automatically and the line is busy, the machine will automatically redial up to three times at five minute intervals.
If you are sending a fax manually and the line is busy, press Redial/Pause and try it again. You can call the last number dialled by pressing Redial/Pause.
Redial/Pause only works if you dialled from the control panel.
Dialling and storing numbers
Storing numbers
You can set up your machine to do the following types of easy dialling: One Touch, Speed Dial and Groups for Broadcasting faxes. You can also specify the default resolution for each One Touch and Speed Dial number. When you dial a quick dial number, the LCD shows the name, if you stored it, or the number. A scan profile can also be stored along with the fax number.
If you lose electrical power, the quick dial numbers stored in the memory will not be lost because they are stored permanently.
A scan profile is the resolution and other scan settings that you choose when you store a number. For example, you will be asked to
select Standard, Fine, or Photo if you have
selected the 
JPG, Gray PDF, Gray XPS, Color JPG, Color
PDF or Color XPS if you selected the
43