Wireless Network | Macintosh® |
Note
•If the machine is configured for your network, choose the machine from the list, and then click OK.
This window will not appear if there is only one
machine connected on the network, it will be chosen automatically. Go to f.
•If your machine is not detected, go to step 24 on page 33 and setup the wireless connection again.
•If you are using WEP and the LCD displayed ‘Connected’ but your machine is not found, make sure you entered the WEP key correctly. The WEP key is case sensitive.
•If this screen appears click OK.
Enter a name for your Macintosh® in
Display Name up to 15 characters long and click OK. Go to f.
•If you want to use the machine’s Scan key to scan over the network you must check the
Register your computer with the “Scan To” function on the machine box.
•The name you enter will appear on the machine’s LCD when you press the Scan key and choose a scan option. (For more information, see Network Scanning in the Software User’s Guide on the
f When this screen appears, click OK.
For Mac OS® X 10.3.x or greater, the installation of
g For Mac OS® X 10.2.4 to 10.2.8 users, click Add.
h Make the selection shown below.
i Choose
j Click Print Center, then Quit Print Center.
|
|
|
|
|
|
|
|
|
|
|
| Wireless | Windows |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ® | |
The installation of | Network | Macintosh | ||||
| ® | |||||
complete. |
|
| ||||
|
| |||||
| ||||||
43