Setting Up the Machine
4
STEP1
1

1 Removing the protective

parts

1Remove the protective tape and film covering
the scanner glass.
2Remove the foam bag containing the ink
cartridges from on top of the paper tray.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.

2 Connecting the cradle power

cord

1Remove tape and plastic bag from the AC
adapter.
2Route the AC power cord through the guide on
the side of the machine. Then, plug the adapter
into an AC power outlet.

3 Installing the battery

1Make sure you remove the battery, battery
cover and cordless handset from the carton.
2Unpack a battery, battery cover and cordless
handset.
3Insert the connector (1) of the battery (2) in t he
direction shown below.
1
2