Step 2 Installing the Driver & Software

For USB Interface Cable Users

(For Windows® 98/98SE/Me/2000 Professional/XP)

Make sure that you have completed the instructions from Step 1 “Setting Up the machine”.

If you are using Windows® 2000 Professional:

To access the PhotoCapture Center™ features from your PC you must be connected using USB and you may have to install a Windows® 2000 update first.

There are two ways to install the Windows® 2000 update:

A)Download Service Pack 3 from the Microsoft® Web page and install it.

We recommend this method because it includes other bug fixes for Windows® 2000.

B)Install the Windows® 2000 update from the MFC Software Suite installer.

You can install it by following the steps below:

1.Follow the installation steps from 1to 8.

2.Click OK to start installation of the update.

3.Click OK to restart your PC.

4.After the PC restarts, the installation will automatically continue.

If the installation does not continue automatically, please open the MFC Software Suite installer menu again by double-clicking the setup.exe program on the Brother CD-ROM, and continue from Step 5 to install the MFC Software Suite.

1Make sure any media cards are not inserted into the media drive of the machine.

2Unplug the machine from the AC outlet and disconnect it from your computer, if you are already connected to an interface cable.

3Turn on your computer.

(For Windows® 2000 Professional/XP, you must be logged on as the administrator.)

4Insert the supplied CD-ROM into your CD- ROM drive.

5Click your language.

6The CD-ROM main menu will appear. Click Install Software.

If this window does not appear, use Windows® Explorer to run the setup.exe program from the root directory of the Brother CD-ROM.

12