For Wireless Network Users
18 Configure the wireless settings
a Confirm that your wireless access point/router has the WPS or AOSS™ symbol as shown below.
b Place the Brother machine within range of your WPS or AOSS™ access point/router. The range may differ depending on your environment (see the instructions provided with your wireless access point/router).
c On your machine, press . Press WPS/AOSS.
d When Enable WLAN? is displayed, press Yes. This will start the wireless setup wizard.
e When the Touchscreen instructs you to start WPS or AOSS™, press the WPS or AOSS™ button on your wireless access point/router (for more information, see the instructions provided with your wireless access point/router), and then press OK on your machine.
This feature will automatically detect which mode (WPS or AOSS™) your wireless access point/router uses to configure your machine.
NOTE
If your wireless access point/router supports WPS and you want to configure your machine using the PIN (Personal Identification Number) Method, see Network User's Guide: Configuration using the PIN Method of WPS
f A connection result message appears on the Touchscreen and a WLAN report will automatically print.
If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 30.
Press OK.
Wireless setup is now complete.
A
To install the
For Windows® Users:
Now go to page 34
For Macintosh Users:
Now go to page 37
NOTE
For mobile device users, see the Advanced Network User's Guides for details on how to use your machine with your mobile device(s). To download the User’s Guide for the application you are using, visit the Brother Solutions Center at http://solutions.brother.com/ and click Manuals on your model's page.
Wireless | ®Windows |
Network | Macintosh |
|
|
29