For Network Users
Web Based Management (web browser)
The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings using HTTP (Hypertext Transfer Protocol).
NOTE
We recommend Windows® Internet
Explorer® 8.0/9.0 for Windows® and Safari 5.0 for Macintosh. Please also make sure JavaScript and cookies are always enabled in whichever browser you use. To use a web browser, you will need to know the IP address of the print server, which is listed on the Network Configuration Report.
a Open your browser.
b Type “http://machine’s IP address/” into your browser’s address bar (where “machine’s IP address” is the IP address of the Brother machine or the print server name).
For example: http://192.168.1.2/
NOTE
If you have configured an optional login password, you must enter it when prompted to access the Web Based Management.
For more information, see Network User's Guide: Web Based Management.
Print the Network Configuration Report
You can print the Network Configuration Report to confirm the current network settings.
a Press 
.
b Press All Settings.
c Swipe up or down, or press a or b to display Print Reports.
Press Print Reports.
d Swipe up or down, or press a or b to display Network Configuration.
Press Network Configuration.
e Press OK.
The machine will print the current network settings.
Restore the network settings to the factory default
You can restore all network settings of the internal Print/Scan server to the factory default.
a Press 
.
b Press All Settings.
c Swipe up or down, or press a or b to display Network.
Press Network.
d Swipe up or down, or press a or b to display Network Reset.
Press Network Reset.
e Press Yes.
f Press Yes for two seconds.
The machine will restart. Disconnect the cables, and after the machine has restarted, reconnect the cables.
39