Network Scanning (For models with
Scan to Image
When you choose Scan to Image, your document will be scanned and sent directly to the PC you designated on your network. The ControlCenter3 software will launch the default graphics application on the designated PC.
a Load your document. |
| |
b Press the | (Scan) key. |
|
c Press a or b to choose Scan to Image. | 4 | |
Press OK. |
|
|
d Press a or b to choose the destination PC you want to send to. Press OK.
If the LCD prompts you to enter a PIN number, enter the
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first digit of the PIN number. Press c to move the cursor, then use a or b to enter the second digit. Repeat until you have entered all four digits of the PIN number. Press OK.
e Press Black Start or Color Start.
The machine starts the scanning process.
For Touchscreen models a Load your document.
b Press the 
(Scan) key.
c Press Scan to Image.
d Press a or b to display the destination PC you want to send to.
e Press the destination PC and then press OK.
If the LCD prompts you to enter a PIN number, enter the
Press OK.
f Press Black Start or Color Start.
The machine starts the scanning process.
Note
•If you want to change between color and black and white scanning, choose color or black and white in the scan type option on the Device Button tab of the ControlCenter3 configuration screen. (See SCAN
•Scan type depends on the settings of the Device Button tab, Black Start or Color Start do not change the settings.
105