Brother NC9100H Associating the Printer

4 - 5 NETBIOS PEER TO PEER PRINTING

NC9100h_FM6.0

You must now enter the server name and port name for the

actual Print/Fax server. You can use the Browse button to

search for the Print/Fax server, select the domain/workgroup

name, and then the server is listed. If the print server does not

automatically appear in your browse list, then you must ensure

that the domain name is configured correctly. Otherwise you

must enter the name manually. The name should be compliant

with UNC (Universal Name Convention). For example:

\\NodeName\ServiceName.

Where NodeName is the NetBIOS name of the Brother Print/

Fax server (the default name is usually BRN_xxxxxx, where

xxxxxx is the last six digits of the Ethernet address), and

ServiceName is the service name for NetBIOS of the Print/

Fax server. By default it is BINARY_P1. For example:

\\BRN_310107\BINARY_P1

Then press OK.

Click the Finish button. You must now restart your computer

before you can continue.

Associating the Printer

You must now create a printer on your Windows® 95/98/Me/

2000/XP and Windows NT® 4.0 systems using the standard

Windows® printer setup procedure. To do this, go the Start

button, select Setting and then Printers.

Select Add Printer to begin the printer installation.

Click Next when you get the Add Printer Wizard window.

You can find the NetBIOS name and MAC address by

printing out the printer configuration page. see Resetting the

Print/Fax Sever back to factory settings (Test Switch) on

page 13-4 for information on how to print the configuration

page on your Print/Fax server.