Brother NC9100H How to Select the Print Server (AppleTalk/EtherTalk)

PRINTING FROM A MACINTOSH® 7 - 8
NC9100h_FM6.0
How to Select the Print Server
(AppleTalk/EtherTalk)
After installing the PPD, use the following steps to select the printer driver:
1 Turn the power of the printer ON.
2 Open the Applications folder.
3 Open the Utilities folder.
4 Open the Print Center Icon.
5 Click the Add Printer button.
6 Select AppleTalk.
7 Select BRN_XXXXXX_P1_AT and click the Add button.
For AppleTalk connections, the
machine 's AppleTalk service name is
BRN_XXXXXX_P1_AT, where XXXXXX is the last six digits of the
Ethernet address.
Printing the configuration page will allow you to confirm the MAC
address. For information on how to print the configuration page, see
Resetting the Print/Fax Sever back to factory settings (Test Switch)
on page 13-4.
8 From the Printer Model pull-down list select your model.
9 Click Add and the printer will be available from the Printer List.