138
EMBROIDERY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing the embroidery unit
Make sure that the sewing machine is completely
stopped and follow the instructions below.
aRemove the embroidery frame.
• For details on removing the embroidery
frame, refer to "Removing the embroidery
frame" (page 144).
bPress , and then press .
XThe embroidery carriage moves into a
position where it can be stored.
cTurn off the sewing machine.
CAUTION
dHold the release button on the bottom left of
the embroidery unit, and slowly pull the
embroidery unit to the left.
aRelease button
XThe embroidery unit separates from the
sewing machine.
CAUTION
Replacing the bobbin case
Use embroidery bobbin thread intended for use with
this machine (page 9).
When using other kinds of embroidery bobbin
thread, use the optional alternate bobbin case (pink
marking). (The bobbin case originally installed in the
machine has a green marking.) For details on how to
remove the bobbin case, refer to "Cleaning the race"
(page 164).
●Always turn off the sewing machine
before removing the embroidery unit.
It may cause malfunctions if removed
when the machine is turned on.
●Do not carry the embroidery unit by
holding the release button compartment.
a