Attaching the Embroidery Frame 143
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Attaching the Embroidery Frame
This section describes how to attach the embroidery frame.

Attaching the embroidery

frame

aWind the embroidery bobbin thread onto the
bobbin and set it into the bobbin case.
• For details, refer to "Winding/Installing the
Bobbin" (page 23).
bRaise the presser foot lever.
aPresser foot lever
cPass the embroidery frame under the presser
foot while raising the presser foot lever even
further.
CAUTION
dWhile lightly holding the lever on the frame
holder to the left, align the two pins on the
embroidery frame holder with the mounting
bracket on the frame, and then press the frame
into the embroidery frame holder until a click
is heard.
aLever
bPins
• Be sure to insert both pins. If only the forward
or the back pin is inserted, the pattern may
not turn out correctly.
CAUTION
●Do not hit the needle with your finger or
the embroidery frame. It may cause injury
or needle breakage.
a
●Correctly set the embroidery frame into
the embroidery frame holder. Otherwise,
the presser foot may hit the embroidery
frame, resulting in injury.
2
1