Embroidering 153
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
dLower the presser foot lever.
aPresser foot lever
ePress (Start/stop button).
aStart/stop button
fAfter progressing 5-6 stitches, press (Start/
stop button) to stop the machine.
gUse scissors to cut the thread at the beginning
of the stitching.
Cut the thread at the edge of the stitching.
• If the thread is left at the beginning of the
stitching, it may be sewn over as you
continue embroidering the pattern, making it
very difficult to deal with the thread after the
pattern is finished. Trim the thread at the
beginning.
hPress (Start/stop button) again.
XThe embroidery begins again.
XStitching stops automatically with
reinforcement after one color has been
completed. When automatic thread cutting
is set, the thread is cut.
iSet up embroidery thread for the next color,
and repeat steps a through h.
jCut the excess thread.
XWhen the last color is sewn, "Finished
sewing." will appear on the display. Press
, and the display will return to the
initial screen.
Memo
zFor the automatic cutting setting, refer to
"LCD (liquid crystal display) operation"
(page 146).
1
1