GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
18
LCD (Liquid Crystal Display) Operation

Selected stitch, pattern settings and messages are displayed on the LCD (liquid crystal display) on the front

of the sewing machine.

Viewing the LCD

When the power is turned on, the LCD comes on, and the following screen is displayed.
The screen is changed using the keys below the screen, and operations performed by directly touching the icons
on the LCD screen.
■Utility stitch selection screen
aSelected stitch
bPresser foot to be used
cStitches
dStitch settings and twin needle sewing
eStitch width (mm)
fStitch length (mm)
gThread tension
hNumber of the selected stitch
iNumber of stitches contained in the selected stitch
type
jHorizontal mirror image
kAutomatic thread cutting
lAutomatic reverse/reinforcement
mSingle/twin needle sewing and needle stop position
■Stitch type selection screen
Press (Utility stitch key) to display the screen for selecting the stitch type. The details are explained in
"Selecting stitching" (page 49).
Memo
z A different screen is displayed when the embroidery unit is attached.
zRefer to "Error messages" (page 171) for messages displayed on the LCD.
zDepending on the model of sewing machine, an animation may be displayed when the power is turned
on. When an animation is displayed, the screen above will be displayed if you touch the LCD with
your finger.
a
b
c
d
ef
j
h
i
g
klm