Winding/Installing the Bobbin 23
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Winding/Installing the Bobbin
This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

Be sure to observe the following precautions
concerning the bobbin.
CAUTION

Winding the bobbin

Wind the thread around the bobbin to prepare the
bobbin thread.
aTurn on the sewing machine.
bOpen the top cover.
cPlace the bobbin on the bobbin winder shaft so
that the spring on the shaft fits into the notch
in the bobbin.
Press down on the bobbin until it snaps into
place.
aNotch
bBobbin winder shaft spring
dSlide the bobbin winder in the direction of the
arrow until it snaps into place.
• (Start/stop button) lights up in orange.
●Only use the Bobbin (part code: SA156,
SFB: XA5539-151) designed specifically
for this sewing machine. Use of any other
bobbin may result in injuries or damage
to the machine.
●The included bobbin was designed
specifically for this sewing machine. If
bobbins from other models are used, the
machine will not operate correctly. Use
only the included bobbin or bobbins of
the same type (part code: SA156, SFB:
XA5539-151).
11.5 mm
Actual size
This model Other model
(7/16 inch)
2
1