GETTING READY — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
44
Removing and attaching the presser foot holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
embroidery foot and quilting foot. Use the
screwdriver to remove the presser foot holder.
aRemove the presser foot.
• For details, refer to "Replacing the presser
foot" (page 42).
bUse the screwdriver to loosen the presser foot
holder screw.
aScrewdriver
bPresser foot holder
cPresser foot holder screw
■Attaching the presser foot holder
aRaise the presser foot lever.
bAlign the presser foot holder with the lower-
left side of the presser bar.
cHold the presser foot holder in place with your
right hand, and then tighten the screw using
the screwdriver in your left hand.
aScrewdriver
Note
zIf the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
a

b

c

1