90
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
eAlign the seam with the center of the zipper,
and then baste the zipper in place.
aWrong side of fabric
bBasting stiching
cZipper
fRemove about 5 cm (2 inches) from the end of
the basting on the outside.
aWrong side of fabric
bZipper basting
cOutside basting
d5 mm (2 inches)
gAttach the presser foot holder to the right pin
of zipper foot "I".
aPin on the right side
bNeedle drop point
• For details, refer to "Replacing the presser
foot" (page 42).
hSelect stitch 3.
• For details, refer to "Selecting stitching" (page
49).
CAUTION
iTopstitch around the zipper.
aStitching
bRight side of fabric
cBasting stitching
dEnd of zipper opening
CAUTION
jRemove the basting stitching.
1
2
3
4
1
2
3
2
1
I
●When using zipper foot "I", be sure to
select the straight stitch (center needle
position), and slowly turn the handwheel
toward you (counterclockwise) to check
that the needle does not touch the presser
foot. If a different stitch is selected or the
needle hits the presser foot, the needle
may bend or break.
●When sewing, be sure that the needle
does not touch the zipper, otherwise the
needle may bend or break.
1
2
3
4