Configuring your machine for a wireless network (Not available for DCP-365CN, DCP-395CN and MFC-295CN)

Step by step chart for wireless network configuration

For Infrastructure mode

a Confirm your network environment. (See page 24.)

3

 

„ Infrastructure mode

 

 

„ Ad-hoc mode

See page 23.

 

 

Connected to a computer with an access point

 

or

Connected to a wireless capable computer without

 

 

 

 

 

 

an access point

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

b Confirm your wireless network setup method. (See page 25.)

 

Using the Setup

 

 

 

Using the

 

 

 

Using the PIN

 

 

 

 

 

 

Wizard from the

 

 

 

 

 

 

 

 

 

Using the Brother

 

 

 

 

 

SES/WPS/AOSS

 

 

 

Method of Wi-Fi

 

 

 

 

 

control panel

 

 

 

 

 

 

 

 

 

installer application

 

 

 

 

 

control panel menu

 

 

 

Protected Setup™

 

 

 

 

 

(Recommended)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Temporarily using a network cable

c Configure your machine for a wireless network. (See page 28.)

Windows®

See page 28. See page 39. See page 44. (See page 49.) Macintosh

(See page 73.)

Using the

SES/WPS/AOSS control panel menu

Windows®

(See page 57.)

Macintosh

(See page 81.)

Installing drivers and software (See the Quick Setup Guide.)

Wireless configuration and installing drivers and software have been completed.

22