Wireless configuration for Windows® using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)

h Temporarily connect the Brother wireless device to your access point using a network cable (not included) and click Next.

4

i Choose the machine you wish to configure, and click Next. If the list is blank, check if the access point and the machine are powered on, and then click Refresh.

Note

The default Node name is “BRNxxxxxxxxxxxx”.

52