Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)

Configuration in Infrastructure mode

Before configuring the wireless settings

IMPORTANT

•If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again.

(For DCP-373CW, DCP-375CW, DCP-377CW, MFC-253CW, MFC-255CW and MFC-257CW)

Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.

5

Press 1 or a to reset and then press 1 or a to accept the change. The machine will restart automatically.

(For DCP-593CW, DCP-595CW, DCP-597CW and MFC-495CW)

Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK. Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.

(For MFC-795CW)

Press MENU, a or b to display Network, press Network. Press Network Reset, and choose Yes to reset and then press Yes for 2 seconds to confirm. The machine will restart automatically.

•Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using more than one WEP KEY enter the KEY used for the first WEP KEY.

•You need to temporarily use an Ethernet cable (not included) during configuration.

•Before configuring your machine we recommend you write down the SSID and Password (if required) for your wireless network. You will need this information before you continue with the configuration.

Item

Record the current wireless network settings

Network name: (SSID/ESSID)

Password

73