Chapter 3

2Communication settings (TD-2120N/2130N only)

Specify wired LAN, wireless LAN and Bluetooth communication settings. The wireless LAN and Bluetooth connections can be used only if the corresponding optional unit is attached to the printer and connection settings are completed.

In order to open [Communication settings], you must be logged on with administrator rights.

3Device settings

Specify printer device settings, such as power settings and print settings. Settings can also be specified for the touch panel display (TD-2120N/2130N only).

In order to open [Device settings], you must be logged on with administrator rights.

4P-touch Template settings Specify P-touch Template settings.

5Paper Size Setup

Add media information and settings to the printer driver in order to use a size not listed in the [Paper Size] list of the printer driver.

In order to open [Paper Size Setup], you must be logged on with administrator rights.

6Exit

Closes the window.

c Check that the printer to be configured appears beside [Printer]. If a different printer is displayed, select the desired printer from the drop-down list.

NOTE

If only one printer is connected, it is unnecessary to make a selection since only that printer will appear.

d Select the item for the settings to be specified, and then specify or change the settings in the dialog box that appeared.

For details on the settings dialog boxes, see Communication Settings (TD-2120N/2130N only) on page 27, Device Settings on page 34, P-touch Template Settings on page 41 or Paper Size Setup on page 44.

e After changing the settings, click [Apply] - [Exit] in the settings dialog box to apply the settings to the printer.

f Click [Exit] in the main window to finish specifying settings.

Use the “Printer Setting Tool” to configure the printer only when the printer is in standby. The printer may malfunction if you attempt to configure it while it is handling a job.

26