7Command Prefix Character

Change the prefix character code. Set a single character code.

The prefix character is a code to identify commands used in P-touch Template mode.

8Non-Printed Character

The characters specified here are not printed when data is received. Specify 1 to 20 characters.

9Available Return Code

The line feed code is used when feeding data to indicate that the following data should be moved to the next line in a text object. One of the following four line feed codes can be selected, or 1 to 20 characters can be specified as the line feed code.

Available settings: [^CR], [\0D\0A], [\0A], [\0D]

10Replace FNC1

Select whether or not GS codes, which are included in barcode protocols such as GS1- 128 (UCC/EAN-128), are replaced with FNC1 codes.

If this check box is selected, a received GS code is replaced with the FNC1 code. If this check box is cleared, a received GS code is outputted as is.

11Number of Copies

Set the number of copies. A number between 1 and 99 can be specified.

12Give priority to print quality

Select the print quality setting. If this check box is selected, priority is given to the print quality.

If this check box is cleared, priority is given to the print speed.

13Inverted 180 Degrees

If this check box is selected, the data will be printed after it has been rotated 180 degrees.

14Communication Settings

Sets the following parameters for serial communication:

Baud Rate: From [300] bps to [115200] bps

Bit Length: [7] bits, [8] bits

Parity: [None], [Odd], [Even]

Busy Control: [DTR], [XON/XOFF]

Printer Setting Tool

15Set

After the [Set] button (in the main dialog box or the Communications Settings dialog box) is clicked, the settings are saved as an .ini file when the dialog box is closed.

To save the specified settings in a command file, select [Save in Command File] from the

drop-down menu. The saved command file can

be used with the mass storage feature to apply 3 the settings to a printer. (See Mass Storage Functions on page 48)

16Cancel

Cancels the settings and closes the dialog box. The settings will remain unchanged.

17Default

Click this button to return the settings (including those in the [Communication Settings] dialog box) to their factory defaults.

43