Connect the RJ25 side of the adapter to the printer.
Connect the printer end of the serial cable to the DB9M side of this adapter.

 

 

 

 

 

 

9

Using the RJ25 to DB9M Serial

 

 

Adapter (Optional:PA-SCA-001)

 

 

 

 

 

 

Connecting the Computer and Printer With the RJ25 to DB9M Serial Adapter

Be sure to use the cable designed for your Brother optional product.

a Before connecting the serial cable, make sure that the printer and the computer are turned off.

b c

d Connect the other end of the serial cable to the serial port on the computer.

Product Specifications

Converts to a D-sub 9-pin male connector.

1

1 RJ25 to DB9M serial adapter

NOTE

•The default communication settings are as follows:

Baud rate: 9600bps

Parity: None

Bit length: 8 bits

Flow control: Hardware

•To change the communication settings, use [P-touch Template settings] in the “Printer Setting Tool” - [Communication settings]. For details, see the P-touch Template Command Reference.

The latest versions can be downloaded from the Brother Solutions Center website. http://solutions.brother.com/

Select the product, and then select [Manuals].

68