Chapter 10
•If you want to reset the settings, use [Device settings] in the “Printer Setting Tool” to return all settings to their factory defaults. For details, see Device Settings on page 34.
Setting the Time and Date
Adjust the clock to the current time and date. This time and date is displayed in the main screen.
a Press [
] (admin key).
b Press [b], select [Setup], and then press [OK].
c Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears.
d Press the number keys to specify the last two digits of the year, two digits for the month and two digits for the day.
For December 1, 2013, press [1] [3] [1] [2] [0] [1].
e Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits each for the hour and minutes.
To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2] [4] [5].
f Press [OK]. The main screen appears, and the specified time and date are displayed.
NOTE
The format for the time and date can be changed. Press [
] (admin key), select [Setup], then [Time&Date Form] from the parameters, and then specify settings for [Date Format] and [Time Format].
Setting the Administrator Password
A password can be set so that basic settings specified by pressing [
] (admin key) cannot easily be accessed. If a password is set, each time [
] (admin key) is pressed, a password must be entered. Access to these parameters can be restricted by setting a password.
a Press [
] (admin key).
b Press [b], select [Admin Password], and then press [OK].
c Press [b], select [On], and then press [OK]. The password input screen appears.
d Type in the
NOTE
•This parameter can be accessed only when touch panel A (basic control panel) is set.
•After a password has been set, the password input screen appears when [
] (admin key) is pressed. Type in the specified
76