UTILITY STITCHES ———————————————————————————————————————————

Entering the pattern data

Follow the pattern drawn on the grid sheet and program the pattern into the sewing machine.

a Attach monogramming foot "N".

•For details, refer to "Replacing the presser foot" (page 43).

b Press (Utility stitch key) on the

operation panel, and select .

c Check the grid sheet set, and specify the coordinates of the first point.

Specify the coordinates using, and

then press .

d Specify whether single stitching or triple stitching will be sewn between the points.

is single stitching, and gives triple stitching.

e Specify the coordinates of the second point,

and then press .

fRepeat steps d through e to specify each point.

•If you make a mistake entering a point, press

, and the previous point is erased.

Memo

￿If you want to edit the pattern, press . You can insert, delete and move points if you have entered at least two points.

For details, refer to "Editing the pattern data" (page 133).

g After all points have been entered, press .

￿The embroidery screen appears.

h Specify the various stitching settings, such as reverse/reinforcement stitching, in the same way as with other stitches.

• To revise the pattern, press .

Memo

￿The pattern you entered can be saved for later use. For details, refer to "Saving patterns" (page 129).

132