GETTING READY ————————————————————————————————————————————

o Cut the thread with scissors, slide the bobbin winder shaft to the left, and then remove the bobbin from the shaft.

Memo

￿If the bobbin winder shaft is set to the right side, the needle will not move. (Sewing is impossible.)

p Slide the sewing speed controller back to its original position.

Memo

￿When the sewing machine is started or the handwheel is turned after winding the bobbin, the machine will make a clicking sound; this is not a malfunction.

■When the thread became tangled under the bobbin winder seat.

If the bobbin winding starts when the thread is not passed under the pretension disk of the bobbin- winding thread guide correctly, the thread may become tangled under the bobbin winder seat.

In such a case, wind off the thread according to the following procedure.

b

a

aThread

bBobbin winder seat

CAUTION

●Do not remove the bobbin winder seat even if the thread become tangled under the bobbin winder seat. It may result in injuries.

●Do not remove the screw of the bobbin winder presser, otherwise the machine may be damaged; you cannot wind off the thread by removing the screw.

a

aScrew of the bobbin winder presser

aIf the thread become tangled under the bobbin

winder seat, press (Start/stop button) once to stop the bobbin winding.

When the foot controller is plugged in, remove your foot from the foot controller.

a

aStart/stop button

26