GETTING READY ————————————————————————————————————————————

ePlace a different presser foot below the holder so that the presser foot pin is aligned with the notch in the holder.

Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read.

a

b c

aPresser foot holder b Notch

c Pin

f Slowly lower the presser foot lever so that the presser foot pin snaps into the notch in the presser foot holder.

a

b

c

d

aPresser foot lever b Presser foot holder c Notch

d Pin

￿The presser foot is attached.

g Raise the presser foot lever to check that the presser foot is securely attached.

Note

￿When a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again.

Buttonhole foot "A"

Overcasting foot "G"

Zigzag foot "J"

Button fitting foot "M"

Monogramming foot "N"

Blind stitch foot "R"

Side cutter "S" (option)

￿For details on the presser foot that should be used with the selected stitch, refer to "Stitch Setting Chart" (page 72).

44