10. APPLYING GREASE (When “GrEASEUP” appears)
10-2. Applying grease
Use
2216M
2. Applying grease1.Turn the power switch to “OFF”.
2.Apply grease in the places indicated by arrows [A] to [G] below.
1159B
Grease3484M
3485M
3486M
1.Remove the screws.
2.Apply grease to each of the holes until the grease overflows slightly.
3.Tighten the screws in order to push the grease in.
4.Turn the machine pulley by hand to move the needle bar up and down several times in order to disperse the grease.
5.Use a cloth to wipe away any excess grease from around the screws.
NOTE:
For screws (1) and (2), remove the screws once more and then wipe around the seats with the rag. After doing this, securely tighten the screws
(1)and (2).
3483M
Grease
3487M
86 |