Buhler 2425, 2335, 2290, 2375, 2360 manual Operation

SECTION 2 - OPERATION

If the Operator does not press the acknowledge/reset button during the pre--alarm sequence, the EICS will progress to the full critical alarm stage. The EICS will display a constant “STOP” message in the upper portion of the display and the lower portion will display all symbols related to the rotary select switch. The audible alarm will become a steady, solid tone. If the automatic shutdown system is enabled on the tractor, the engine will shut off automatically. If the automatic shutdown system is not enabled, the tractor will continue to run. See “Automatic Shutdown Conversion” in the Operator’s manual for information on how to enable and disable this system. Pressing the acknowledge/reset button will not clear the display or audible alarm after the EICS has reached the critical alarm stage.

ATTENTION: If the tractor electrical system is not converted to the automatic shut down mode, the engine will continue to run at a high engine coolant temperature. Serious engine damage can result from running the engine in this condition. It is imperative that the high coolant temperature condition be corrected and investigated as soon as possible so as to avoid serious engine damage.

If the tractor is shut down and then restarted, and the alarm condition still exists on the tractor (High Engine Coolant Temperature), the EICS and module will repeat the alarm and derate sequence. If the tractor is restarted and the alarm condition has been corrected, the tractor will return to normal operation. If the tractor is not shut down, and the alarm condition is corrected, the tractor will return to normal operation without having to shut it off and restart it.

2-83