Buhler 2425, 2335, 2290, 2375, 2360 manual Operation

SECTION 2 - OPERATION

The module will illuminate the appropriate engine warning light (yellow or red) based on the source of the fault, and will take additional action by adjusting the performance of the engine by one of following methods:

--Illuminate engine warning light only, no performance modification

--Illuminate engine warning light, perform speed derate only

--Illuminate engine warning light, perform power derate only

--Illuminate engine warning light, perform speed and power derate

The appropriate engine warning light will remain illuminated and the performance derate will remain in effect until the system fault is corrected. The Operator cannot cancel or interrupt the derate sequence from occurring on the engine. The module does not recognize activation of nor is it tied into the EICS acknowledge/reset button on the dash of the tractor.

If the tractor is shut down and then restarted, and the electrical fault still exists on the tractor (non--critical or critical), the module will repeat the warning light and derate sequence. If the tractor is restarted and the fault has been corrected, the tractor will return to normal operation. If the tractor is not shut down, and the alarm condition is corrected, the tractor will return to normal operation without having to shut it off and restart it.

Important: Whenever an engine warning light (yellow or red) is illuminated on the EICS of the tractor shut the tractor down and contact your Buhler Versatile Dealer to investigate the cause of the concern. Your Buhler Versatile Dealer will coordinate the repair of the engine via an authorized Cummins Engine Company dealer/distributor.

2-93