Buhler 2425, 2335, 2290, 2375, 2360 manual Introduction to this Manual, OPERATOR’S Manual Holder

SECTION 1

GENERAL INFORMATION

INTRODUCTION TO THIS MANUAL

This manual has been prepared to assist you in the correct procedure for breaking in, driving, operating, and maintaining your tractor.

The manual is divided into five sections as detailed in the “Contents” page. An index is provided at the back of the manual.

Read this manual carefully and keep it in the manual holder attached to the rear of the seat for future reference. If at any time you require advice concerning your tractor, do not hesitate to contact your authorized Buhler Versatile dealer. He has factory-trained personnel, genuine replacement parts, and the necessary equipment for your service requirements.

Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions. Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer, to ensure that it reaches you in optimum condition. To maintain this condition and ensure trouble-free operation, it is important that the routine services, as specified in this manual, are carried out at the recommended intervals.

All data given in this book is subject to production variations. Dimensions and weights are approximate only, and the illustrations do not necessarily show tractors in standard condition. For exact information about any particular tractor, please consult your authorized dealer.

The company policy is one of continuous improvement, and the right to change prices, specifications or equipment at any time without notice is reserved.

Section “0” of this manual lists the precautions to be observed to ensure your safety and the safety of others. Read the safety precautions carefully and follow the advice offered BEFORE operating the tractor.

OPERATOR’S MANUAL HOLDER

A manual holder, 1, is attached to the rear of the seat. Store the operator’s manual and other tractor information in the holder.

Figure 1-1

1-1