Bunn DG-2, WDG-2

Place funnel with filter into rails, press (Func) button to advance to Function

One.

1. When entering this function, load sensor is tared. To gain access to remaining

functions, press (+) or (-) button once to enter password(0). Display will read

(0) now press (Func).

2. Set weight offset, right grinder. Press (+) or (-) to adjust if necessary. Press

(Func).

3. Set weight offset, left grinder. Press (+) or (-) to adjust if necessary. Press

(Func).

4. Enter calibration mode? If yes, press (+) display will read (1) then press (Func).

If no, press (Func).

NOTE - Pressing (Func) will return to idle display.

5. Use present weight as tare for calibration? If yes, press (+). Display will read

(1) then press (Func). If no, press (Func).

6. To calibrate by grinding coffee, press (+) display will then read (1) then press

(Func).

7. Enter desired calibration weight using (+) and (-) buttons. Then press start

switch on grinder. Display changes to 0.00 and shows increasing weight as

coffee is ground. When grinding stops and 7 has reappeared in left corner of

the display. Push (Func) to advance to Function 8 before removing funnel.

8. Weigh sample grind and enter actual weight onto the display by pressing (+)

or (-) if necessary. To abort and retain old calibration enter 0.00. Press (Func)

when complete.

10. Enter new password. To keep same password press (Func), to change pass-

word press (+) or (-), press function to enter new password and return to

function 0, normal operation.

NOTE: Display shows "----" when taring. Do not disturb while this is shown.

NOTE: WDG2 Models can be converted from weight based settings to timed

settings by pressing the (+) and (-) buttons for 10 seconds. Repeating the

process will convert back to weight based settings.

0000 9999

0.00 9.99

0 = No 1 = Yes

1 = Grind

3.00 16.00

0.00 16.00

0000 9999

DIGITAL CONTROL DISPLAY ASSEMBLY FUNCTION LIST - WDG-2

FUNCTION NO. FUNCTION RANGE

MIN. MAX.

Coffee Weight/Timer Settings

Approx. 4.0 seconds per ounce, Medium Roast, Drip Grind.

Approx. 5.5 seconds per ounce, Dark Roast, Drip Grind.

Time will vary depending on bean density & grind size.

Check samples by weight.

10854 030300