Installing Cover 1. At top of trailer frame, fit openings on cover sides around
handle bar mounts. Fasten small buckle sections together.
Adjust as needed. PHOTO 12
2. On trailer sides, join buckle sections on rear cover corners
to buckle sections below side windows.
3. On trailer front, slip D-rings on front cover corners over
hooked corners of tow bar mounts.
Attaching Handle Slide handle into lower handle bar receivers and tighten knobs
securely. To change height position, flip handle bar over. PHOTO 13
Installing Safety Flag Insert flag pole into hole in top of LEFT handle bar
receiver. PHOTO 14
PHOTO 12
PHOTO 13: Tighten knob clockwi se
PHOTO 14
8 BURLEY D’LITE ST AND SOLO ST OWNER’S INSTRUCTION AND SAFETY MANUAL
IMPORTANT
DO NOT USE TRAILER WITHOUT SAFETY FLAG.
Inserting flag pole in handlebar receiver
Handlebar Mount
Opening
Buckle
Trailer Front
Tighten Knob
Handle Bar