Operating Instructions and Parts Manual
Assembly and Preoperation
Assembly and Preoperation
1.Slide the handle assembly over the lower legs of the cart base. Use the (supplied) star knob and bolts to secure the handle to the legs (See Figure 9).
2.Slide clear plastic detergent hose onto brass hose barb (See Figure 10).
3.Insert quick connect spray tips into rubber holders on front of the placard. (See Figure 11).
4.Secure garden hose (not included) to the inlet connection on pump (See Figure 12).
5.Connect the high pressure hose to the pump outlet (See Figure 13).
6.Attach the lance to the gun (See Figure 14).
7.Install quick connect tip (See Figure 15).
Figure 9 - Assemble handle
Figure 11 - Insert spray tips into the holder
Figure 10 - Attach suction tube to barb fitting
Figure 13 - Connect high pressure hose to pump
Figure 14 - Attach lance to gun | Figure 15 - Quick connect tip |
Detergent Hose /
Chemical Tube
Hose
Barb
Pump Outlet
| Pump Inlet | |
Garden | Thermal | |
Relief Valve | ||
Hose | ||
|
Figure 12 - Pump hook up
10www.chpower.com