PW4035

Pre-Operation

Keep hose away from sharp objects

Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose.

Unpacking

Remove the equipment and all parts from the carton.. The carton should contain the following:

•One pressure washer (pump, engine, cart base)

•One cart handle assembly

•One spray gun and quick connect lance

•Five spray tips

•One high pressure hose

•One pack of nuts, bolts, and manuals

If any parts are missing, DO NOT

RETURN THE UNIT TO THE RETAILER. Know the unit’s model number (located on the serial number tag on the pressure washer frame) and call 1-800-330-0712 for replacement parts..

After unpacking the product, inspect it carefully for any damage that may have occurred during transit.. Make sure to tighten fittings and bolts before using the pressure washer..

do not operate the unit if it’s damaged

Figure 2 – Attach suction tube to barb fitting

3.Insert quick connect spray tips into rubber holders on front of the placard.. (See Figure 3)..

Figure 3 - Insert spray tips into the holder

5.Connect the high pressure hose to the pump outlet (See Figures 4 and 5)..

Figure 5 – Connect high pressure hose to pump

6.Attach the lance with nozzle to the gun (see Figure 6)..

Figure 6 – Attach lance to gun

during shipping, handling, or use. Damage could result in bursting and cause injury or property damage.

Assembly

1.Slide the handle assembly over the lower legs of the cart base. Use the star knob and bolt to secure the legs.. See Figure 1..

Star

Knob

Figure 1 – Assemble Handle

2.Slide clear plastic detergent hose onto brass hose barb (See Figure 2)..

4.Secure garden hose (not included) to the inlet connection on pump (See Figure 4)..

Chemical Injector

Hose Barb

High Pressure

Hose

Pump

Outlet

Pump

ThermalInlet

Relief

Garden Hose

Figure 4 - Pump hook up

5

www.chpower.com