Straight Finish Nailer
| Visit us at chpower.com | 1 Close pressure | 2 Attach air hose |
CHN70500 | ||
| regulator, Turn ON | to regulator outlet. |
| compressor and | Adjust regulator |
Setup Like a Pro | Allow tank to reach | knob so outlet |
maximum pressure. | pressure is between | |
Easy Setup Guide |
| 70 psi and 120 psi. |
|
|
Projects are easier with Campbell Hausfeld products.
70120 psi psi
Thank you for deciding to purchase a Campbell Hausfeld product. We are dedicated to providing tools that help you to complete your projects Like a Pro.
NOTICE: To operate this tool you will need
at least a 1 gallon compressor.
© 2010 Campbell Hausfeld/Scott Fetzer IN730200AV 2/10
3 Load fasteners. See manual for further information regarding length and type of fasteners.
4 Attach coupler on air hose to nailer inlet.
Nail
Pusher
Latch
Button
Pull pusher back until it | Load nails. | Press pusher latch button and allow |
latches. |
| pusher to ride against nails. |
Setup Like a Pro | CHN70500 — Air Powered Straight Finish Nailer |