Pressure Washers
UNPACKING
Remove the equipment and all parts from the carton. The carton should contain the following.
•One pressure washer (pump, engine, cart base).
•One cart handle assembly.
•One spray gun.
•One lance with nozzle.
•Spray tips (not included with all models).
•One high pressure hose.
•One pack of nuts, bolts, and manuals.
•One or two bottles of engine oil.
If any parts are missing, DO NOT
RETURN THE UNIT TO THE RETAILER.
Know the unit’s model number (locat- ed on the serial number tag on the pressure washer frame) and call
After unpacking the product, inspect it carefully for any damage that may have occurred during transit. Make sure to tighten fittings and bolts before using the pressure washer.
Do not operate the unit if it’s damaged
during shipping, handling, or use. Damage could result in bursting and cause injury or property damage.
ASSEMBLY
Use 1/2” wrench to assemble pressure washer.
1.Slide the handle assembly over the lower legs of the cart base. Use the standard nut and bolt to secure the legs. See Figure 1.
Figure 2 - Connect detergent hose to brass barb
3.If applicable: insert quick connect tips into rubber holders on front of placard (See Figure 3).
Figure 3 - Insert quick connect tips
4.Secure garden hose (not included) to the inlet connection on pump (See Figure 4).
Figure 5 - Connect high pressure hose to pump
6.Attach the lance with nozzle to the gun (See Figure 6).
Figure 6 - Attach lance to gun
7.Install quick connect tip, if applicable (See Figure 7).
Figure 4 - Secure garden hose |
| Figure 7 - Quick Connect Tip |
|
|
|
|
|
|
5.Connect the high pressure hose to the pump outlet (See Figure 5).
Figure 1 - Assemble Handle
2.Connect clear plastic detergent hose to brass barb on pump (See Figure 2).
www.chpower.com
4