Operating Instructions and Parts Manual

Model WS0970 and WS0990

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Shielded Metal

Arc Welder

Description

This Campbell Hausfeld Arc Welder is designed to be used on standard 115V household current. It is equipped with an output control to accurately select the proper current needed for various welding conditions. Internal components are thermostatically protected.

This welder can weld up to 1/8 in. steel in a single pass. Recommended electrode size is 1/16 in. diameter for 15 amp circuits, up to 5/64 in. diameter for 20 amp circuits. For replacement electrodes, call (800) 746-5641 for the nearest dealer.

Unpacking

When unpacking, inspect carefully for any damage that may have occurred during transit. Report any damaged or missing items by calling 1-800-746-5641.

Circuit Requirements

This equipment requires a

dedicated 115 volt circuit. Refer to the following chart for the correct circuit breaker or fuse rating. Do not run other appliances, lights, or tools on this

WS0970

WS0990

5

5

3

4

4

 

 

2

 

 

1

 

 

1

 

3

2

Figure 1 - Welder Components and Controls

circuit while operating this equipment. Extension cords are not recommended. Blown fuses or tripped circuit breakers can result from failure to comply with this recommendation.

 

Heat

Circuit Breaker or

 

 

Setting

Slow Blow Fuse

 

 

L o w

15 amp

 

 

 

 

 

 

H i g h

20 amp

 

Components and Controls

1 . Work Clamp - connect to work piece

2 . Electrode Holder - holds electrode welding rod

3 . Power Cord - plug into 115 volt outlet.

4 . Power Switch - High/Off/Low.

5 . Indicator Light - light activates if thermostat has automatically shut unit off .

General Safety

Danger means a hazard that will cause death or serious injury if the

warning is ignored.

Warning means a hazard that could

cause death or serious injury if the warning is ignored.

Caution means a hazard that may

cause minor or moderate injury if the warning is ignored. It also may mean a hazard that will only cause damage to property.

NOTE: Note means any additional information pertaining to the product or its proper usage.

Always keep a fire extinguisher accessible while performing arc welding operations.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

©2009 Campbell Hausfeld/Scott Fetzer

For parts, product & service information

IN972101AV 2/09

visit www.chpower.com