Advanced Guide
> About Network Communication > Changing and Confirming Ne twork Settings > Printing Out Network
Setting Information
Printing Out Network Setting Information
You can print out the network settings of the machine such as its IP address and SSID.
Important
This print out contains valuable information about your computer. Handle it with care.
1. Make sure that the machine is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the Rear Tray.
3. Press the Menu button repeatedly and select Device settings.
4. Use the button to select LAN settings, then press the OK button.
5. Use the button to select Print LAN details, then press the OK button.
The following information on the machine's network setting is printed out.
Item Explanations of the item Setting
Wireless LAN Wireless LAN Enable/Disable
Link Status Status of the Wireless LAN Active/Inactive
MAC Address MAC Address
XX:XX:XX:XX:XX:XX
SSID SSID SSID of the wireless LAN
Connection Mode Connection Mode Infrastructure
Channel Channel
XX (1 to 13)
Encryption Method of the Encryption none/WEP/TKIP/AES
WEP Key Length WEP Key Length Inactive/128/64
Authentication Method of the Authentication auto/open/shared/WPA-PSK/WPA2-PSK
Signal Strength Signal Strength 0 to 100 [%]
TCP/IP Version TCP/IP Version IPv4/IPv6
IP Address Selected IP Address
XXX.XXX.XXX.XXX
Default Gateway Default Gateway
XXX.XXX.XXX.XXX
Subnet Mask*1 Subnet Mask
XXX.XXX.XXX.XXX
Subnet Prefix
Length*2
Subnet Prefix Length
XXX
IPsec*3 IPsec setting
Active
Security Protocol*3 Method of the Security Protocol ESP/ESP & AH/AH
Printer Name Printer name Printer name (Up to 15 characters)
WSD WSD setting Enable/Disable
WSD Timeout Timeout 1/5/10/15/20 [min]
LLTD LLTD setting Enable/Disable
LPR Protocol LPR protocol setting Enable/Disable
Bonjour Bonjour setting Enable/Disable
Bonjour Service
Name
Bonjour service name Bonjour service name (Up to 52
characters)
Bonjour LPR Service Bonjour LPR service Enable/Disable
Page 946 of 973 pagesPrinting Out Network Setting Information