Canon 08011-41-UD2-003 6.1.7Scan to Fax Configuration Screen Error Messages, 6.1.8Scan to Folder Configuration Screen Error Messages

Message	Cause	Remedy
		Perform any of the following:
Default value for ‘Subject’	The [Subject] check box is	• Clear the check mark from the
		[Subject] check box.
field cannot be empty if	selected, the [Subject] text box
		• Enter a default value in the
the field is disabled and	is blank, and the [Required]
		[Subject] text box.
required.	check box is selected.
		• Clear the check mark from the
		[Required] check box.
Default value for ‘Subject’	The default value in the	Make sure the default value in the
field is too long. It cannot	[Subject] text box exceeds 255	[Subject] text box does not exceed
exceed 255 characters.	characters.	255 characters.
Default value for ‘Body’	The default value in the	Make sure the default value in the
field is too long. It cannot	[Body] text box exceeds 255	[Body] text box does not exceed
exceed 255 characters.	characters.	255 characters.

6.1.7Scan to Fax Configuration Screen Error Messages

This section explains the Scan to Fax Configuration screen error messages, along with possible causes and remedies. For more information on the remedies, see “Configuring Scan to Fax Settings,” on p. 97.

Message	Cause	Remedy
Fax Recipient Template	The [Fax Recipient Template]	Enter a fax recipient template.
cannot be empty.	text box is blank.
Fax Recipient Template	The value entered in the [Fax
	Recipient Template] text box	Add the variable
must contain the ‘Fax	does not contain the ‘Fax	${FAXNUMBER} to the fax
Number’ variable.	Number’ variable	recipient template.
	‘${FAXNUMBER}’.

6.1.8Scan to Folder Configuration Screen Error Messages

This section explains the Scan to Folder Configuration screen error messages, along with possible causes and remedies. For more information on the remedies, see “Configuring Scan to Folder Settings,” on p. 100.

Message	Cause	Remedy
	The connection to the WINS
Connection Failed. Could	server failed because	Check the WINS server IP and try
	Authorized Send cannot
not connect to x:42	connect to the WINS server IP,	again.
	represented by x, and the
	WINS server port 42.

158 Authorized Send Installation and Configuration Guide for imageRUNNER Machines