5. Filters

You can attach filters to the filter mounting thread on the front of the lens.

• Use a polarizing Canon filter.

Filter holder for the EF14mm f/2.8L USM

There is a gelatin filter holder at the rear of the lens. Cut the gelatin filter to fit within the white frames. Then insert the gelatin filter into the filter holder ❽ .

6. Hood

The lens hood can keep unwanted light out of the lens, and also protects the lens from rain, snow, and dust.

EF50mm f/1.4 USM

Fit the hood to the hood mount, then turn it in the direction of the arrow to attach it securely.

EF20mm f/2.8 USM, EF24mm f/1.4L USM, EF28mm f/1.8 USM, and EF35mm f/1.4L USM

To attach the hood, align the hood’s attachment position mark with the red dot on the front of the lens, then turn the hood in the direction of the arrow until the lens’s red dot is aligned with the hood’s stop position mark ❾ .

EF85mm f/1.8 USM and EF100mm f/2 USM

Press the buttons on both sides of the hood to attach  .

EF200mm f/2.8L USM

Pull the hood out from the front of the lens until it stops  .

Lenses other than the EF14mm f/2.8L USM and EF200mm f/2.8LUSM

The hood can be reverse-mounted on the lens for storage.

•Part of the picture may be blocked if the hood is not attached properly.

•When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent deformation, do not grasp the rim of the hood to turn it.

nThe lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm to include the E-58U/E-72U lens cap and dust cap, and 24.2 mm for the E-58II/E-72 II.

nThe size and weight listed are for the lens only, except as indicated.

nAperture settings are specified on the camera.

nAll data listed is measured according to Canon standards.

nProduct specifications and appearance are subject to change without notice.

nCase and hood not provided with some models.

nFilters sold separately.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

❽●

❾●

●

●

Specifications

 

 

Angle of view

 

Lens

Minimum

Max. magnification and field of view

Min. focusing

Filter

Max. diameter and length

Weight

Hood

Case

 

Diagonal

Vertical

Horizontal

construction

aperture

distance

diameter

 

 

 

 

 

 

 

EF14mm f/2.8L USM

114°

81°

104°

10-14

22

0.10X/246 × 375 mm (9.7” × 14.8”)

0.25 m/0.82 ft.

*1

77 × 89 mm (3.0” × 3.5”)

560 g/19.6 oz.

*2

LP1016

EF20mm f/2.8 USM

94°

62°

84°

9-11

22

0.14X/176 × 264 mm (6.9” × 10.4”)

0.25 m/0.82 ft.

72 mm

77.5 × 70.6 mm (3.1” × 2.8”)

405 g/14.2 oz.

EW-75II

LP1214

EF24mm f/1.4L USM

84°

53°

74°

9-11

22

0.16X/150 × 227 mm (5.9” × 8.9”)

0.25 m/0.82 ft.

77 mm

83.5 × 77.4 mm (3.3” × 3.1”)

550 g/19.4 oz.

EW-83DII

LP1214

EF28mm f/1.8 USM

75°

46°

65°

9-10

22

0.18X/139 × 212 mm (5.5” × 8.3”)

0.25 m/0.82 ft.

58 mm

73.6 × 55.6 mm (2.9” × 2.2”)

310 g/10.9 oz.

EW-63II

LP814

EF35mm f/1.4L USM

63°

38°

54°

9-11

22

0.18X/136 × 206 mm (5.4” × 8.1”)

0.3 m/0.98 ft.

72 mm

79

× 86 mm (3.1” × 3.4”)

580 g/20.5 oz.

EW-78C

LP1214

EF50mm f/1.4 USM

46°

27°

40°

6-7

22

0.15X/164 × 249 mm (6.5” × 9.8”)

0.45 m/1.48 ft.

58 mm

73.8 × 50.5 mm (2.9” × 2.0”)

290 g/10.2 oz.

ES-71II

LP1014

EF85mm f/1.8 USM

28°30’

16°

24°

7-9

22

0.13X/191 × 287 mm (7.5” × 11.3”)

0.85 m/2.79 ft.

58 mm

75

× 71.5 mm (3.0” × 2.8”)

425 g/14.9 oz.

ET-65III

LP1014

EF100mm f/2 USM

24°

14°

20°

6-8

22

0.14X/175 × 262 mm (6.9” × 10.3”)

0.9 m/2.95 ft.

58 mm

75

× 73.5 mm (3.0” × 2.9”)

460 g/16.1 oz.

ET-65III

LP1014

EF200mm f/2.8L USM

12°

7°

10°

7-9

32

0.16X/152 × 226 mm (6” × 8.9”)

1.5 m/4.92 ft.

72 mm

83

× 136.2 mm (3.3” × 5.4”)

790 g/27.7 oz.

*2

LH-D18

*1 Built-in gelatine filter holder

*2 Built-in

CT1-8536-0031208SZ© CANON INC. 2006