USB Connection
Install the Software
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of applications to be installed.)
The screens below are based on Windows Vista operating system Ultimate Edition (hereafter referred to as "Windows Vista") and Mac OS X v.10.5.x.
For a USB connection, a USB cable is required.
USB cable
•Quit all running applications before installation.
•Log on as the administrator (or a member of the Administrators group).
•Do not switch users during the installation process.
•Internet connection may be required during the installation. Connection fees apply.
•It may be necessary to restart your computer during the installation process. Follow the on- screen instructions and do not remove the Setup
•Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not supported.
□If the Found New Hardware or Found New Hardware Wizard dialog box appears:
If you connect a USB cable to the machine before installation of the drivers, this screen appears.
1
The dialog box may close. In this case, proceed from 
.
2 Click Cancel to quit the dialog box.
3 Proceed from 
.
14USB Connection