Install the Ink Tanks

5

Install all the other ink tanks in the same way.

Install all the ink tanks.

Make sure all the Ink lamps light red.

•Once you have installed the ink tanks, do not remove them unnecessarily.

6

E

D

Close the Scanning Unit (Cover) (D).

Make sure the Inner Cover (E) is closed.

•Wait until the LCD changes as shown in the illustration (about 5 minutes) and go to the next step.

•The machine may make some operating noises when preparing to print. This is normal operation.

•For your safety, always hold the Scanning Unit (Cover) with both hands when closing it.

•If an error message is displayed on the LCD, make sure that the Print Head and the ink tanks are correctly installed.

Hardware Setup 11